Steel Coil Flat-Rolled Products

Stretcher Level Sheet + Edge Trim

Stretcher Level CTL + Edge Trim
Material Type	Any Material
Gauge Range	0.060" to 0.320" (See note)
Width	3" to 74" (Tolerance: +/- 0.031")
Edge Trim Width – Minimum	≤ 0.150" thick: 0.312" / side
Edge Trim Width – Minimum	> 0.150" thick: 0.375" / side
Edge Trim Width – Max	2" per side all gauges
Part Length	3" to 540" (Tolerance: +/- 0.031" < 240" length)
Coil Info – Max Weight	80,000 lbs.
Coil Info – Max OD	84"
Coil Info – Max ID	20" to 35"
Max Stack Weight	20,000 lbs.
Note: Max Yield: 100,000 PSI to 0.250" x 74" / 80,000 PSI to 0.312" x 74"

Narrow Coil Cut-to-Length
Material Type	Any Material
Gauge Range	0.010" to 0.200" 60 KSI Yield at 0.200" x 24"
Width	1" to 24" (Tolerance: Mill Edge)
Part Length	2" to 192" (Tolerance: +/- 0.010")
Coil Info – Max Weight	12,000 lbs.
Coil Info – Max OD	66"
Coil Info – Min ID	17"
Coil Info – Max ID	32.5"
Coil Info – Yield at Max Gauge	60,000 PSI Max
Max Stack Weight	10,000 lbs.
This line is dedicated to material 24" wide or less. It allows us to offer customers with such coils a lower base processing cost than running on our wide lines.